Brigandine armor in stock

Covered round pauldrons were really popular type of armor in the 15th century. Simple forged hemispheres often covered with cloth or leather. This heat and rust protection made them not so formidable in appearance, but greatly prolonged their lifespan. Sizes are shown in photo  Width: 21 cm (8.3 inches) Length: 23 cm  (9 inches)

Circumference in the clasp place: 37 cm (14.5 inch)  Steel plates of 1.0 mm inside The width and length you see in photos 3 and 4  You can use this handcrafted brigandine arm armor for: SCA HEMA Larp Stage performances Medieval festivals Reenactment events 

Woolen brigandile with steel plates inside  – 1 mm . Steel rivets .  Cotton lining. Leather fasteners. Brigandine will fit on next measurements :  Chest circumference over padded protection : 120 – 129 cm ( 47.2 -50.7 inch ) Total length of brigandine is 70 cm  (27.5 inch) 

We propose you very interesting thing – Do It Yourself Brigandine Constructor. In this set you will find everything you need to create brigandine with your own hands!  Constructor    include:  Woolen cover, already sewn; Cotton lining, already sewn; Set of metal plates, already with holes; Piece of leather (to make leather washers out of it); Leather punch; Leather straps with steel buckles; Steel nails (rivets); Thread and needle; Instruction. You will need only hummer, nippers and metal shears at home! The model of plates can be different then on main photo.  Size chart of brigandine constructors: ...

Woolen brigandine with steel rivets .  Сotton lining. Inside are stainless steel plates 1mm Brigandine will fit on next measurements :  Chest circumference over padded protection : 103 – 109 cm  (40.5 – 42.9 inch) Waist circumference over padded protection : 86 -91 cm ( 33.8 - 35.8 inch) Total length of brigandine is 72 cm (28.34)

We propose you very interesting thing – Do It Yourself Brigandine Constructor. In this set you will find everything you need to create brigandine with your own hands!  Constructor include:  Crimson woolen cover, already sewn; Black cotton lining, already sewn; Set of metal plates, already with holes; Piece of leather (to make leather washers out of it); Leather punch; Leather straps with steel buckles; Steel nails (rivets); Thread and needle; Instruction. You will need only hummer, nippers and metal shears at home! The model of plates can be different then on main photo.  Size chart of brigandine constructors:...

Brigandine protection made of steel 1mm. and cover of wool outside. Circumference of the clasp  :  37 – 45 cm , depending on what hole you will fasten  ( 14 inch – 17 inch ) Total product length : 39 cm , you will see in photo 5 and 6  (15 inch) Total product width : 27 cm , you will see in photo 5 and 6  (10 inch)

Woolen brigandine with steel rivets .  Сotton lining. Inside are stainless steel plates 1mm Brigandine will fit on next measurements :  Chest circumference over padded protection : 110 – 119 cm ( 43.3 - 46.8 inch) Waist circumference over padded protection : 92-102 cm (36.2 - 40.1 inch) Total length of brigandine is 72 cm (28.34 inch)  

Brigandine protection made of steel 1mm. and cover of wool outside. Circumference of the clasp:  37 – 45 cm, depending on what hole you will fasten  (14 inch – 17 inch) Total product length: 39 cm, you will see in photo 3 (15 inch) Total product width: 27 cm, you will see in photo 4  (10 inch)

We propose you very interesting thing – Do It Yourself Brigandine Constructor. In this set you will find everything you need to create brigandine with your own hands!  Constructor include:  Yellow woolen cover, already sewn; Black cotton lining, already sewn; Set of metal plates, already with holes; Piece of leather (to make leather washers out of it); Leather punch; Leather straps with steel buckles; Steel nails (rivets); Thread and needle; Instruction. You will need only hummer, nippers and metal shears at home! The model of plates can be different then on main photo.  Size chart of brigandine constructors: ...

We propose you very interesting thing – Do It Yourself Brigandine Constructor. In this set you will find everything you need to create brigandine with your own hands!  Constructor include:  Green woolen cover, already sewn; Black cotton lining, already sewn; Set of metal plates, already with holes; Piece of leather (to make leather washers out of it); Leather punch; Leather straps with steel buckles; Steel nails (rivets); Thread and needle; Instruction. You will need only hummer, nippers and metal shears at home! The model of plates can be different then on main photo.  Size chart of brigandine constructors: ...

Light gray wollen bracers made of 1 mm steel .  Will fit on next measurements : Forearm circumference ( under the elbow ) : 33 – 41 cm ( 84 – 104 inch) Wrist circumference : 21- 30 cm ( 53 – 76 inch) 

Woolen brigandile with steel middle plates inside  – 1 mm .   Steel rivets .  Cotton lining Leather brown fasteners straps. Brigandine will fit on next measurements :  Chest circumference over padded protection : 120 – 129 cm (47.24 – 50.78 inch) Total length of brigandine is 70 cm  (27.5 inch)  

Brigandine protection made of steel 1mm. and cover of wool outside. Will fit on next measurements : Forearm circumference ( under the elbow ) : 33 – 41 cm ( 84 – 104 inch) Wrist circumference : 19- 24 cm  and ower padded protection :  21- 30 cm ( 53 – 76 inch)   Length : 33 cm Width : 27 cm

Woolen brigandile with steel middle plates inside  – 1 mm .  Steel rivets .  Cotton lining. Leather fasteners straps.  Brigandine will fit on next measurements :  Chest circumference over padded protection : 120 – 129 cm ( 47.2 –50.7 inch) Total length of brigandine is 70 cm  (27.5 inch) 

Brigandine protection made of steel 1mm. and cover of wool outside. Will fit on next measurements : Forearm circumference ( under the elbow ) : 33 – 41 cm ( 84 – 104 inch) Wrist circumference : 21- 30 cm ( 53 – 76 inch)   The total the total length  32 cm  (you can see in photos 3 and 4)

Woolen brigandile with steel middle plates inside  – 1 mm . Steel rivets .  Cotton lining Leather straps. Brigandine will fit on next measurements :  Chest circumference over padded protection : 120 – 129 cm (47.24 -50.7 inch) Total length of brigandine is 70 cm  (27.5 inch) 

Brigandine protection made of steel 1mm. and cover of wool outside. Will fit on next measurements : Forearm circumference ( under the elbow ) : 33 – 41 cm ( 84 – 104 inch) Wrist circumference : 21- 30 cm ( 53 – 76 inch)  Color may be a little different in real life due to camera color rendering